Today the styles of mouse pad was obvious, especially the mouse pad on the pattern, whether or not you want to find your own favorite team, an amazing character, and so on, you can find, but there are several. As the small is equipped with a computer, they are mainly to ensure the mouse work. Of course if you have to use the computer, you need it, how has their own personalized mouse pad?
Simple 5 steps, you can make your individual mouse pad：
Step one：Cut a piece of colorful craft foam to the size you want your mouse pad.
Step two：Take a piece of scrap fabric, and cut it to the same size.
Step three：Draw on the fabric if you would like, using fabric markers.
Step four：Use spray adhesive to spray the piece of foam and stick the fabric to the piece of foam.
Step five：Let it dry, and start using your new mouse pad!
If you do not meet this simple mouse pad, you can also use your favorite picture or photo mouse pad that you like.
One：Purchase some blank white 8x9x1/4 pads.
Two：Purchase some inkjet transfer paper.
Three：Design your image in Paint Shop Pro, Adobe or any other image design software.
Four：Test your final image on a blank 8x10 piece of paper.
Five：You are now ready to insert the transfer paper if the test is good.
Six：Let sheet of transfer paper (with a 8x11 image on it) dry for 5 or 10 minutes and get your iron plugged in and ready, unless you have a commercial heat press.
Seven：Study the instructions included with your transfer paper.
Eight：Place your transfer paper image on the pad and begin to press the iron on the pad in back and forth motions.
Nine：Peel the paper away starting at one corner, - Note that transfer papers vary in whether you should peel when they are hot or cold.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.